Solar panel cleaning
Dust, pollen, and hard-water spray cut into what your array produces. A careful clean gives that production back.
Every visit, no upsell.
- Full array washed with deionized water
- Soft-bristle brushes only, never abrasives or harsh detergent
- Panel surfaces left to dry spot-free
- Visual check for cracked glass, loose clamps, or lifted seals
- Debris cleared from under-panel gaps where accessible
How we do it.
Confirm the array
Panel count, roof pitch, and access. We work from ladders and roof-safe footing, and we tell you up front if any section is not safely reachable.
Rinse the loose layer
A low-pressure rinse lifts dust and pollen first, so the brush is never dragging grit across the glass.
Soft-brush each panel
Deionized water and a soft-bristle brush, panel by panel. No pressure washing, no abrasives, nothing that risks the anti-reflective coating.
Pure-water final rinse
The last rinse is mineral-free, so it dries clear and leaves no film to attract the next layer of dust.
Report what we saw
If we notice cracked glass, corrosion, or hardware working loose, you hear about it with photos, even though repairs are not what we do.
Heavily soiled panels in dry, dusty climates are commonly cited as losing roughly 15–25% of their output. How much a clean recovers depends on how dirty the array was.
Ready when you are.
A written quote within 24 hours, usually the same day. No hard sell.
Get a free quote